Volume 13, Issue 1 (1-2023)
IJOCE 2023, 13(1): 55-72 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mottaghi L, Kaveh A, Izadifard R A. OPTIMAL DESIGN OF NON-PRISMATIC REINFORCED CONCRETE BOX GIRDER BRIDGE: MINIMIZATION OF THE COST AND CO2 EMISSION. IJOCE 2023; 13 (1) :55-72
URL: http://ijoce.iust.ac.ir/article-1-541-en.html
URL: http://ijoce.iust.ac.ir/article-1-541-en.html
1- Civil Engineering Department, Imam Khomeini International University, Qazvin, Iran
2- School of Civil Engineering, Iran University of Science and Technology, Tehran, Iran
2- School of Civil Engineering, Iran University of Science and Technology, Tehran, Iran
Abstract: (7010 Views)
This paper presents a computational framework for optimal design of non-prismatic reinforced concrete box girder bridges. The variables include the geometry of the cross section, tapered length, concrete strength and reinforcement of box girders and slabs. These are obtained by the enhanced colliding bodies optimization algorithm to optimizing the cost and again CO2 emission. Loading and design is based on the AASHTO standard specification. The methodology is illustrated by a three-span continuous bridge. The trade-off between optimal cost and CO2 emission in this type of bridge indicates that the difference of costs, as well as CO2 emissions in the solution with both objectives is less than 1%. However, the optimal variables in the cost objective are different from the variables of CO2 emission objective.
Type of Study: Research |
Subject:
Optimal design
Received: 2022/11/20 | Accepted: 2022/11/19 | Published: 2022/11/19
Received: 2022/11/20 | Accepted: 2022/11/19 | Published: 2022/11/19
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
