Search published articles


Showing 8 results for Hoseini Vaez

A. Kaveh, S. R. Hoseini Vaez, P. Hosseini,
Volume 8, Issue 3 (10-2018)
Abstract

Vibrating particles system (VPS) is a new meta-heuristic algorithm based on the free vibration of freedom system’ single degree with viscous damping. In this algorithm, each agent gradually approach to its equilibrium position; new agents are generated according to current agents and a historically best position. Enhanced vibrating particles system (EVPS) employs a new alternative procedure to enhance the performance of the VPS algorithm. Two different truss structures are investigated to demonstrate the performance of the VPS and EVPS weight optimization of structures.
A. Kaveh, S. R. Hoseini Vaez, P. Hosseini, H. Abedini,
Volume 10, Issue 3 (6-2020)
Abstract

In this research, a new objective function has been proposed for optimal design of the Buckling Restrained Braced Frames (BRBFs) is performed using nonlinear time history analysis. The BRBF is a particular type of bracing system that has been widely utilized in recent years. The nonlinear time history analysis also provides a detailed view of the behavior of the structure. The purpose of this study is to provide an optimal design based on minimizing the weight of the structure while increasing the energy dissipation capability of the structure. Due to the complexity of the problem, the Enhanced Vibrating Particles Systems (EVPS) meta-heuristic algorithm is used to perform the optimization. Here, a 3-story frame, a 6-story frame and a 9-story frame are investigated simultaneously considering the continuous and discrete optimization.
P. Hosseini, H. R. Hoseini Vaez, M. A. Fathali, H. Mehanpour,
Volume 10, Issue 3 (6-2020)
Abstract

Due to the random nature of the variables affecting the analysis and design of structures, the reliability method is considered as one of the most important and widely used topics in structural engineering. Despite the simplicity of moment methods, the answer to problems with multiple design points (the point with the highest probability of failure) such as transmission line towers depends a lot on the starting point of the search; and it may converge to the local optima answer which is not desirable. Simulation methods also require a large number of evaluations of the limit state function and increase the volume and time of calculations. Also, the design point is not calculated in most of these methods. In this study, the reliability index of four transmission line towers was calculated with four metaheuristic algorithms in which the limit state function was defined based on the displacement of nodes and the results were compared with the results of Monte Carlo Simulation (MCS) method. For this purpose, the objective function was defined as the geometric distance between the point on the function of the boundary condition to the origin in the standard normal coordinate system and the constraint of the problem (the limit state function) based on the displacement of the nodes. Random variables in these problems consisting of the cross-sectional area of the members, the modulus of elasticity, and the nodal loads.
S. R. Hoseini Vaez, P. Hosseini, M. A. Fathali, A. Asaad Samani, A. Kaveh,
Volume 10, Issue 4 (10-2020)
Abstract

Nowadays, the optimal design of structures based on reliability has been converted to an active topic in structural engineering. The Reliability-Based Design Optimization (RBDO) methods provide the structural design with lower cost and more safety, simultaneously. In this study, the optimal design based on reliability of dome truss structures with probability constraint of the frequency limitation is discussed. To solve the RBDO problem, nested double-loop method is considered; one of the loops performs the optimization process and the other one assesses the reliability of the structure. The optimization process is implemented using ECBO and EVPS algorithms and the reliability index is calculated using the Monte Carlo simulation method. Finally, the size and shape reliability-based optimization of 52-bar and 120-bar dome trusses has been investigated.
A. Kaveh, S. R. Hoseini Vaez, P. Hosseini, H. Fathi,
Volume 11, Issue 2 (5-2021)
Abstract

A modified dolphin monitoring (MDM) is used to augment the efficiency of particle swarm optimization (PSO) and enhanced vibrating particle system (EVPS) for the numerical crack identification problems in plate structures. The extended finite element method (XFEM) is employed for modeling the fracture. The forward problem is untangled by some cycle loading phase via dynamic XFEM. Furthermore, the inverse problem is solved and compared via two PSO and EVPS algorithms. All the problems are also dissolved by means of fine and coarse meshing. The results illustrate that the function of XFEM-PSO-MDM and XFEM-EVPS-MDM is superior to XFEM-PSO and XFEM-EVPS methods. The algorithms coupled via MDM offer a higher convergence rate with more reliable results. The MDM is found to be a suitable tool which can promotes the ability of the algorithms in achieving the optimum solutions.
A. Kaveh, P. Hosseini, N. Hatami, S. R. Hoseini Vaez,
Volume 12, Issue 1 (1-2022)
Abstract

In recent years many researchers prefer to use metaheuristic algorithms to reach the optimum design of structures. In this study, an Enhanced Vibrating Particle System (EVPS) is applied to get the minimum weight of large-scale dome trusses under frequency constraints. Vibration frequencies are important parameters, which can be used to control the responses of a structure that is subjected to dynamic excitation. The truss structures were analyzed by finite element method and optimization processes were implemented by the computer program coded in MATLAB. The effectiveness and efficiency of the Enhanced Vibrating Particle System (EVPS) is investigated in three large-scale dome trusses 600-, 1180-, and 1410-bar to obtain the weight optimization with frequency constraints.
P. Hosseini, A. Kaveh, N. Hatami, S. R. Hoseini Vaez,
Volume 12, Issue 3 (4-2022)
Abstract

Metaheuristic algorithms are preferred by the many researchers to reach the reliability based design optimization (RBDO) of truss structures. The cross-sectional area of the elements of a truss is considered as design variables for the size optimization under frequency constraints. The design of dome truss structures are optimized based on reliability by a popular metaheuristic optimization technique named Enhanced Vibrating Particle System (EVPS). Finite element analyses of structures and optimization process are coded in MATLAB. Large-scale dome truss of 600-bar, 1180-bar and 1410-bar are investigated in this paper and are compared with the previous studies. Also, a comparison is made between the reliability indexes of Deterministic Design Optimization (DDO) for large dome trusses and Reliability-Based Design Optimization (RBDO).
 
P. Hosseini, A. Kaveh, S. R. Hoseini Vaez,
Volume 12, Issue 4 (8-2022)
Abstract

The existence of uncertainties in engineering problems makes it essential to consider these effects at all times. Robust design optimization allows a design to be made less sensitive to uncertain input parameters. Actually, robust design optimization reduces the sensitivity of the objective function and the variations in design performance when uncertainty exists. In this study, two space trusses were optimized based on the modulus of elasticity, yield stress, and cross-sectional uncertainties in order to increase the response robustness and decrease the weight. The displacement of one node has been used as the criterion for Robust Design Optimization (RDO) of these two structures. Two trusses with 72 members and 582 members are considered, which are famous trusses in the field of structural optimization. Also, the EVPS meta-heuristic algorithm was employed which is an enhanced version of the VPS algorithm based on the single degrees of freedom of a system with viscous damping.
 

Page 1 from 1     

© 2024 CC BY-NC 4.0 | Iran University of Science & Technology

Designed & Developed by : Yektaweb